|
 
| Cuttable material |
Modeling wax |
| X,Y,and Z operation strokes |
X, Y, and Z: 305 x 205 x 100 mm (12 x 8.1 x 3.9 in.) |
| Connectivity |
USB (compliant with Universal Serial Bus Specification Revision 1.1) |
| Power requirements |
|
|
Voltage and frequency
|
AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1) |
|
Required power capacity
|
2.8 A (100 to 120 V)/1.2 A (220 to 240 V) |
| Power consumption |
275 W |
| Dimensions |
Width x depth x height: 606 x 656 x 557 mm (23.9 x 25.9 x 22 in.) |
| Weight |
47 kg (104 lb) |
| Environmental |
Operating environment: Temperature of 5 to 40°C (41 to 104 °F), 35 to 80% relative
humidity (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1) |
| Accessories |
Power cord, Handy panel, Tools for modeling (ball end mill, diameter 3.175mm /conical end mill, diameter 3.175 mm), collet (diameter 3.175 mm), detection pin, hexagonal screwdriver, hexagonal wrench, cap screws (10), spanner (10 mm, 17mm), modeling wax, clamp holder, square clamp (large), square clamp (small), swivel clamp, tube clamp, dust tray, blower fan, User’s Manual, SRP Player Installation and Setup Guide, SRP Player CD-ROM, Roland Software Package CD-ROM, Roland JewelStudio DVD-ROM |
| Computer/OS |
Model preinstalled with Windows Vista® (32-bit edition), Windows® XP, Windows® 2000, or upgraded computer originally preinstalled with Windows® 2000 or later (Internet Explorer 6.0 or later required) |
| CPU |
Pentium III 600 MHz or faster (Pentium 4, 2.4 GHz or faster recommended) |
| RAM |
512 MB or more (1 GB or more recommended) |
| Optional drive |
DVD Drive |
| Free hard-disk space |
1 GB |
| Other |
At least 16-bit color (High Color) and a resolution of 1,024 x 768 or more (video card compatible with OpenGL)
IntelliMouse recommended |
| USB cable |
Use a shielded cable up to three meters (10 ft.) in length |
| Item |
Model number |
Description |
| Finishing cutter |
ZEC-J3015 |
Cemented carbide dia. = 3.175 x 50 (L) x 5 (l) x 0.1 (W) Same as the included finishing cutter |
Shaping cutter
(ball end mill) |
CAP-LN-EBD |
Cemented carbide R0.5 dia. = 3.175 x 50 (L) x 1.2 (l) Same as the included shaping cutter |
| Collets for end mill |
ZC-23 |
Diameter 3 mm, 4 mm, 5 mm, and 6 mm; 1 pc. each |
| |
ZC-23-3 |
Diameter 3 mm |
| |
ZC-23-4 |
Diameter 4 mm |
| |
ZC-23-6 |
Diameter 6 mm |
| Replacement spindle unit |
ZS-30 |
|
dia = flute diameter, R = flute radius, l = flute length, L = overall length, W = blade width, unit = mm
|
